|
NuScope for Inspector Raman, RockHound and Advantage Series
The NuScope™ is a USB microscope attachment for imaging thin films, microelectronic circuits, mineral inclusions, pigments in art work, identification of narcotics and plastic explosives, and biological tissues. Illumination of the sample surface is obtained with an attached LED light ring that plugs into a connector on the front of the spectrometer. The surface image is viewed in real time with a color video camera using USB Shot software, which allows movie and screen capture. Coarse focus is achieved on the specimen with manual adjustment, and fine focusing is obtained by a focus adjust knob to render a sharp image. Third party rack and pinion microscope stages are used to assist in focusing and transversing the sample across the field of view (FOV) which is approximately 800µm at 100x focal power.
Скачать буклет
Inspector Raman/RockHound Point and Shoot Attachment
The point and shoot attachment is used for rapid and efficient analysis of solids. It is mounted on the instrument’s sampling nose with a simple set screw. The laser focal point (7.8mm) extends to the end of the point and shoot for simple and efficient focusing. For outside use, a black shroud is placed over this attachment to minimize the effects of ambient light.
XYZ Stand
The XYZ Stand is used for portable Raman systems. The XYZ platform is magnetized for removal of the stage. The XYZ stage features 116mm x 137mm work surface with stage clips, 50mm x 75mm x-y travel, and 0.1mm graduations.
|
Advantage Series and Inspector Raman Glass Sample Holder
The Glass Sample Holder comes standard with the Advantage Series and Inspector Raman. The holder mounts on the exit port and is used for sampling liquids, emulsions and powders through 8mm vials. Inserts are provided for the analysis of liquids and crystals through NMR tubes and MP tubes. The focusing knob is used to optimize the Raman signal. The most intense Raman signal is obtained as the focal length is optimized just beyond the glass interface. Advantage Series Right Angle Input Optics Right Angle Input Optics allow horizontal sampling. This guides the exit/collection beam of the spectrometer at a 90° angle toward the sample. Right Angle Input Optics have a focal length of approximately 16.45mm.
Скачать буклет
Advantage Series Input Optics Extension
The Input Optics Extension incorporates objectives that extend the exit beam and collection signal 5” beyond the instrument. This allows the instrument to access the sample in congested sampling areas. The focal point is approximately 16.45mm beyond the Input Optics Extension.
|
